Navodya Group Pvt. Ltd. : ER. Tiles Cleaner is a heavy-duty, fast-acting cleaning solution formulated to remove tough cement smears, grout haze, efflorescence, hard water scale, and construction grime from tiles without damaging the surface glaze.
What is ER Tiles Cleaner and Where Should It Be Used?
ER Tiles Cleaner is a specialized acid-based cleaning formulation balanced with protective surfactants. It dissolves stubborn inorganic residues—such as cured cement deposits, plaster splashes, dried grout film, and mineral scaling—that plain soap and detergents cannot budge.
It is ideal for post-construction site handover cleaning as well as periodic deep-cleaning of bathroom tiles, shower enclosures, and exterior tiled terraces. It restores the original shine, color, and luster of tiles without scratching.
Safe Application & Dilution Guide
Always test in a small inconspicuous area before full application, and follow proper dilution instructions.
- Pre-Wetting: Wet the tiled area with clean water before applying the cleaner to protect cement joints.
- Dilution: For routine cleaning, dilute 1 part cleaner with 3-4 parts clean water. For heavy cement and grout stains, use 1:1 or apply neat.
- Application: Apply the diluted solution over the stained tiles using a sponge, soft mop, or plastic brush.
- Dwell Time: Allow the cleaner to react with the grime for 3 to 5 minutes (do not allow the solution to dry on tiles).
- Scrubbing & Rinsing: Scrub gently with a non-scratch pad, then rinse thoroughly with plenty of clean water to neutralize the surface.
Post-Construction Handover
Effortlessly dissolves tough grout haze, dried mortar splashes, and paint flecks to prepare newly tiled spaces for handover.
Glaze-Safe Formula
Specially inhibited to remove mineral scaling without etching or dulling the glossy finish of ceramic and vitrified tiles.
Frequently Asked Questions About Tiles Cleaner
No. Acid-based cleaners must never be used on acid-sensitive stones like marble, limestone, or travertine as they will etch the polish. Use on ceramic, vitrified, and porcelain tiles only.
Always pre-wet joints with water prior to application. This prevents the grout from absorbing the cleaner. Rinse the entire area thoroughly with clean water after scrubbing.
Yes. ER Tiles Cleaner breaks down calcium carbonate, magnesium scale, and soap scum deposits rapidly, restoring bathroom tiles to like-new condition.
Wear rubber gloves, eye protection, and ensure adequate ventilation while applying. Avoid breathing vapors and keep out of reach of children.
Our formulation is buffered with pleasant odor-control agents, significantly reducing harsh fumes compared to raw commercial muriatic acid.